TOP 10 Best hoods for the kitchen: built-in kitchen furniture | Rating 2019 + Reviews

Basic low-cost 210 W model with push-button control and sliding panel. The performance of the Elikor KV II M-400-60-260 model in the air outlet mode (pipe diameter - 120 mm) is 400 cubic meters. m / h with the ability to adjust the power and the use of a turbine. 

The device is 60 cm wide and 34.8 cm deep with a grease filter and 2 x 20W halogen lamps for lighting. Works both in the mode of removal of air, and for circulation. Available in a metal case in 6 colors, so it is suitable for almost any kitchen furniture set.

Model Simfer 6006 W with a metal case and 1 motor operates in 3 modes and is controlled using the buttons on the panel. The device, 60 cm wide, is equipped with metal filters that capture not only steam and smell, but also microparticles of fat that enter the air during frying.

The maximum performance of the device is 400 cubic meters. m / h, from additional functions: lighting with 1 incandescent lamp for 40 W, anti-return valve and the ability to work both for air exhaust and for its circulation. The maximum noise level at the most powerful operation is 55 dB.

A 60 cm wide retractable hood with a power of only 120 W is capable of operating in a maximum capacity of 450 cubic meters. m/h at 2 speeds. For lighting, 1 incandescent lamp is used, the body and edging are made of metal.

A width of 60 cm allows you to tightly integrate the hood into the cabinet, and an air outlet pipe with a diameter of 120 mm quickly removes steam and unpleasant odors from the kitchen. Additionally, the device is equipped with an anti-return valve, which allows you to keep the air fresh even when it circulates. 

The device operates at 2 speeds without the possibility of switching to intensive mode, while creating noise at a level of only 46 dB thanks to a single motor. Grease filter made of 3 layers of aluminum gratings, arranged asynchronously, traps fat and oil particles formed during the heat treatment of products.

The extractor hood in a durable metal case with a power consumption index of 103 W has a maximum capacity of 650 cubic meters. m/h The standard width of 60 cm allows the LEX Hubble G 600 to be easily integrated into a kitchen wall cabinet, while the depth of 28 cm protects the surface from fumes and drops of oil and grease.

Operating modes: extraction and circulation at 2 speeds effectively purify the air in the room, removing it through a branch pipe with a diameter of 120 mm. Ease of use is achieved by push-button mechanical control (tact switches) and illumination by 1 LED lamp 2.5 W.

The noise level from the operation of the device is only 48 dB, the model has a grease filter to trap sprayed particles.

With a width of only 52 cm, the narrow range hood fits into even the cramped kitchen, and is characterized by high performance - up to 270 cubic meters. m/h The Faber Inca Smart C GR A52 model is made in a durable stainless steel case and is equipped with a grease filter.

The power of the device with a single motor - 135 W allows you to remove fumes and odors from the room at 3 speeds in the extraction and circulation modes. The diameter of the air outlet pipe is 15 cm. 

For lighting, 2 incandescent lamps of 40 W each are provided. The device cannot be called quiet - the noise level during operation reaches 64 dB.

A retractable model in a silver metal case with a width of only 45 cm will organically fit even into limited space, and thanks to the performance of 550 cu. m/h device is able to effectively purify the air. 

The power of a single-motor engine - 170 W makes it possible to operate the device at 2 speeds in the retraction and circulation modes. The hood at maximum load creates noise at the level of 55 dB, and if necessary, it also serves as an additional light source due to 2 incandescent lamps of 40 W each. Included with the device is a mesh grease filter.

Seamlessly assembled from metal, this twin-engine hood has the thinnest front bar of any competitor. The control of the Kronasteel Kamilla Slim 2M 600 inox model is carried out using buttons using the Memobutton system, when each new start starts from the speed of the previous one. 

The surface of the hood is non-marking due to the Antimark grinding technology, and the 13.5 cm high motor unit can be easily integrated into the smallest kitchen cabinet. The width of the device is 60 cm, and the diameter of the air outlet pipe is 12 cm.

The hood operates at 3 speeds, is equipped with a grate filter to trap particles and fumes, as well as 2 x 28 W halogen lamps for additional lighting of the stove. The device at maximum power makes noise at the level of 60 dB.

The extractor hood, fully integrated in the kitchen cabinet, with a width of 60 cm and a depth of 29.6 cm, is powered by 1 motor. Consuming 190W, the device operates at 3 speeds and is controlled by sliders. The maximum productivity of the device is 850 cubic meters. m/h in exhaust and circulation modes - allows you to quickly capture and remove air from a kitchen up to 35 square meters through a pipe with a diameter of 12 cm. m. 

For lighting, 2 halogen lamps of 20 W each are provided, for the cleanliness of kitchen furniture - lattice grease filters, and for air purification - 2 carbon traps. The hood works quite quietly, creating a noise level of 48 dB.

Extractor hood from the premium segment with 2 motors and a maximum capacity of 730 cc. m/h In recirculation mode, it is able to drive 310 cubic meters through the system. m/h, works at 3 speeds. The device is equipped with an electronic control system with a digital display and a timer for centralized shutdown. 

Additionally, on the front panel there are indicators for switching on and operating mode, which the hood 2 has: outlet and recirculation. Included with the device is already given 2 greasy grating filters, but the manufacturer advises to buy a carbon one for better air purification in the room.

The standard width of 60 cm allows the stainless steel hood body to be optimally integrated into the furniture. For spot lighting of the stove surface or as a side light source in the kitchen, 2 lighting lamps with a power of 20 W each are used.

It is recommended to hang the device above the cooking surfaces in such a way that 43-45 cm remain above the electric stove, and 65-70 cm above the gas stove.

Built-in extractor hood with parametric air suction and a maximum capacity of 730 cu. m/h The smeg KSDD 90 VN implements the design "Domino", due to which the device is built into the table and put forward for work upstairs. 

The case is made of stainless steel with black glass inserts. The device works in 3 speeds and in a short-term intensive mode (for 10 minutes).The noise level at minimum speed is 42 dB, which is optimal for a 285 W motor and a 292 W connection power. The hood is equipped with a non-return valve, 2 steel grease filters and 1 6W LED lamp.

The width of the device is 90 cm, which allows you to capture the maximum area of ​​\u200b\u200bthe room, and the diameter of the outlet pipe is 15 cm – quickly remove unpleasant odors and fumes into the ventilation system.