Interesting needlework for the home: a master class for decorating your home interior with your own hands | (100+ Photos & Videos)

It will take about 1 hour to work first you need to put together all 4 boards and make a markup. It is better to measure the same distance. For example, if the length of the painting is 50 cm wide, then you need to put marks every 12.5 cm.

The next step is to fill the holes with adhesive. It is better to take silicone glue of the Titan type, since the PVA will not hold the magnets inside the holes, and the hot melt adhesive will move away from the walls of the tree over time. One magnet is taken, smeared with glue and inserted into the hole.

Then this manipulation is done on each of the 4 boards. The result is bars with magnets inside, which must be interconnected by inserting a poster or picture. For these purposes, a flexible picture on medium-weight paper is better suited.

When the hole is ready, the rope is threaded through the holes, forming stopper knots on the reverse side. Now you can insert a picture between the planks and fix it on the wall. The finished product will decorate any room in the house.

First, make a frame: pine plywood is sawn into bars measuring 20x40 cm. They are fastened together with fasteners and a screwdriver. Additionally, the joints are glued with wood glue.

Then make the legs: a sheet of plywood is sawn into pieces that are convenient in size for the stability of the support. With the help of glue, screws and clamps, the support legs are fastened and left for several hours to dry.

At the final stage, the tabletop is fixed, then they start decorating the table. You can leave it as is, covered with a protective varnish from moisture. You can paint the table with white paint, then sandpaper to create streaks.

The first step is to place a paper towel or thin cloth on the ironing board. Put the selected botanical element on it and cover it with another piece of fabric on top. Turn on the iron at medium temperature and iron the fabric with the plant element for several minutes.

After that, they take white cardboard and place the selected dried elements on it in a chaotic manner. Use double-sided tape to stick the plants. If glue is used, then PVA drops will be visible in the picture when dried.

At the end, the finished picture must be placed under glass and inserted into the frame. If this is not done, then over time, under the influence of ultraviolet light, the sheet will turn yellow. If there is a desire to make a picture of dried leaves, it is enough to do the same without using an iron.

The backing of the frame is removed, leaving only the wooden part. Papyrus paper is cut into triangles. Using a brush and glue, randomly fix pieces of paper on the workpiece.

When the PVA glue dries, you can use varnish to create a protective layer on the surface. If desired, you can add other decor - buttons, ribbons. Summer photography is perfect for this frame.

To make an accessory, you will need 5 wine bottles, a candle or a lighter, a container with cold water, stained glass paints of different shades, cartridges for installing light bulbs. Work begins with the division of the bottles into 2 parts in the center. To do this, mark a circle on the surface, arm themselves with a candle and warm up the markup for 5-7 minutes, and then lower the bottle into cold water - after that it is easy to split it into equal parts.

The cut bottles are painted in different colors, wearing protective gloves on their hands. When staining, first hold the bottle by the neck, and when the lower part dries, cover the very neck of the bottle with paint. To make the paint evenly distributed over the inner surface of the glass, shake the bottle.

Wires are inserted into each bottle, connecting cartridges to them. You can use E27 cartridges. All wires are wound with electrical tape, divided into two bundles, and then inserted into the chandelier mount.

To work, you will also need orange acrylic paints, a 30x30 cm canvas, a flat brush, a pencil, carbon paper, and a glue gun. You should start work by drawing a sketch: for this, a maple leaf outline is drawn with a simple pencil. Then the canvas of paper is painted orange - you can mix orange paint with yellow to add brightness.

After dyeing the canvas, they begin to fix the pumpkin seeds. With the help of hot glue, the seeds are first placed along the contour, then the centers are filled. When the templates are filled, you can draw the outline of the stems with black paint or a pencil.

The panel is ready - now they can decorate the bedroom, living room or kitchen. Such a picture can be made with a child for a lesson in kindergarten. As a basis, you can take any shade of paint.

Of the tools you will need hot glue, acrylic paint, metallic paint, varnish. You also need decorative paper with a print - it will serve as the basis for the keys. To begin with, they glue decorative paper onto the canvas of the photo frame - you can use a napkin and do decoupage.

Next, you need to wait for the napkin to dry. When the material is dry, the keys are laid out schematically, determining their location. Then they take hot glue and fix the keys on paper. If necessary, the keys are pre-painted and varnished.

Then proceed to the processing of the frame. It is better that it be in the Baroque or Rococo style. The frame is cleaned of old paint, sanded, covered with primer. When the primer dries, the frame is painted with the chosen color, then varnished.

To work, you need scissors, PVA glue and a flat-type brush. To begin with, foliage motifs are cut out from a napkin, while it is necessary to separate the top layer with a pattern, and the remaining two do not need to be used. Glue is applied to the candle.

A cut out leaf from a napkin is applied to the surface with glue and gently pressed. It is better to do this with a flat brush soaked in glue. Waiting for the drawing to dry.

The candle is ready when the glue has dried. If desired, you can cover the candle with varnish - then the picture will be preserved for a long time. The candle is used for its intended purpose or serves as a decor.

When the strips are glued, the top and bottom are covered with glue.

Then scatter the sparkles and carefully distribute them over the surface of the section.

Wait for drying and peel off the strips.