Drainage pumps | TOP 10 Best: choose assistants for pumping clean and dirty water + Reviews

Submersible apparatus designed to work with clean water. Allows you to filter particles up to 6 mm, plunging deep into the thickness of 8 m. At the same time, the throughput of the device is 21 cubic meters per hour. Maintains temperature of the pumped-over liquid from +1 to +35 degrees.

The pump is installed horizontally, equipped with a float switch for protection against dry running and an automatic water level control system.

The body of the Drainer is made of plastic. The device operates on a voltage of 220 W (50 Hz), while the length of the power cord reaches 10 m.

Low-power, compact (weighs less than 5 kg) pump, designed specifically for working with contaminated liquids with an admixture of fractions up to 20 mm in diameter. An optional pre-filter is included to protect the impeller from oversized particles.

The submersible device has options for a float switch and a switching level, which allows you to automate the drainage process. Another feature is the Quick Connect feature for quick connection of 1 ¼" hoses.

The device is able to operate in manual (provides a minimum level of residual water) and automatic (reacts to the water level) modes. Installed in a vertical position.

This pump is capable of pumping ground, drainage and filtration water from rooms and basements, regardless of whether the liquid is clean or dirty. With the same ease Whirlwind DN-1100N will cope with the supply of water from a well or well.

With this device, you do not need to monitor the liquid level - the product is equipped with a float switch and will stop working immediately after pumping out. The permissible number of inclusions per hour reaches 20, which allows you to perform high-quality work on the removal of excess fluid.

The outlet pipe diameter is ¼ inch and the cord length is 8 m. The device operates on a voltage of 220 W and consumes a current of 3.6 Amperes. For transportation, a convenient handle is provided.

The submersible single-stage apparatus of the Danish company Grundfos is designed for pumping dirty liquids with inclusions up to 10 mm without fibers, as well as clean liquids.

It is used to divert water from the drain of washing machines, sewage and drainage of flooded premises (the maximum temperature of the pumped water is +50 degrees). Despite its low power, it easily pumps water out of ponds and stakes, wells.

The model has the ability to easily replace the cable due to the molded wire contacts. The base is removable, without thread, which helps with cleaning from dirt. There are additional filter holes in the lower part, a float on a flexible cable.

Submersible device of small power, light, compact, ideal for domestic needs. Suitable for stationary operation (connected to the pipeline) and easily transported from place to place (hose connected).

The electric motor is equipped with a cooling jacket. Additionally, protection is implemented in the form of a thermal relay and end seals on the pump and motor sides. Withstands a maximum operating pressure of 10 atmospheres, therefore, despite the IP68 protection class, it is not recommended to immerse the device deeper than 1 m.

The device of the American brand works most efficiently when vertically immersed in water. Suctions liquid with impurities up to 35 mm in diameter from pools, wells, reservoirs. Operates automatically thanks to a float switch.

The static gland has a built-in spring that functions throughout the entire life of the device. The kit includes a fitting for connecting a 25-38 mm hose, and the diameter of the outlet pipe itself is stepped: from 1 to 1 ½ inches.

The model allows you to pump out and pump clean and contaminated liquids with particles up to 30 mm in diameter. If you install this pump permanently in the basement or in the basement, then the premises will not be flooded. Thanks to the Aquasensor system, the device automatically turns on when the water level rises above 65 mm.

The body is made of glass-fibre reinforced plastic, which increases the performance of the device. The pump impeller is wear-resistant, and the capacitor motor is equipped with a thermal relay for overload protection.

The model has a universal outlet connector that allows you to connect hoses with a diameter of ½.5/8, ¾, 1, 1½ inches. The pump is protected from dry running, there are manual and automatic modes.

The device is designed for difficult operating conditions: it cannot be called compact, because the weight due to the cast iron body is 27 kg. However, BELAMOS is ahead of its competitors in other parameters: the device has one of the highest water pressure and power ratings.

A powerful model for pumping and pumping dirty water with a grain size of up to 38 mm and an impurity content of up to 5% - this type of pollution is usually found in cisterns and construction pits.

The kit, together with the device, includes a universal angle fitting and a combined nipple. The pump elements are protected by a four-level sealing system. The machine is equipped with a float switch and has a 2" outlet.

Among the range of Quattro Elementi pumps, only Drenaggio 400 F is designed for pumping dirty liquids (with small fractions of pollution up to 35 mm). Install the device only on a hill, where there is no debris and waste.

The outlet pipe of the device is directed upwards, but it is not recommended to immerse the product deeper than 2 m in water. The case is made of plastic, there is a mechanism for protection against dry running.

The device is too weak to pump water out of a well or cope with a foundation pit, but it can effectively pump out flooding from a basement or a washing machine.