Solid fuel boiler for heating a private house | TOP-12 Best: Rating + Reviews

Domestic floor boiler runs on coal, wood, coke. The body is made of steel, treated with a composition that protects against corrosion.

Manual loading of fuel in the upper part allows you to pour coal from a bucket. This speeds up the process. The heat exchanger is all-welded, which protects the model from leaks. The circulation is forced and natural. Some boiler options have the ability to connect to natural gas. To control pressure and temperature, sensors are installed on the body.

The floor boiler is designed for heating. Case material – cast iron, which makes the model resistant to mechanical influences.

Coarse coal or firewood is required for work, with a size of at least 32 cm and a diameter of up to 18 cm. The intensity of the process is adjusted using a damper. Thanks to the cast-iron body and heat exchanger, heat is distributed evenly. The combustion chamber of the big sizes and special crushing of fuel is not required.

The Zota Poplar M 14 model can be called universal, since it can work not only on solid fuels. 

The use of reserve types of fuel - gas and electricity - is envisaged as a raw material. The boiler has low power, but it is enough for domestic use. The body is made of steel protected by an anti-corrosion coating. The firebox door opens horizontally, there is a lock for fixing the door in the closed position. For thermal insulation, a basalt insulation is installed between the body and the firebox. This keeps heat loss to a minimum.

The design of the boiler is thought out so that it is used as the main source of heat and auxiliary. In the second version, it is connected to models of any type - liquid fuel, gas, electric. The unit operates in open mode with a forced circulation system and in closed mode. 

Small size allows you to install the model in small houses, it does not allocate a separate room. The combustion chamber is large, it can fit firewood up to 40 cm long. The large ash pan under the chamber is easy to clean.

The body of the floor boiler is made of steel. The model does not have a boiler and works only for heating.  

There is no circulation pump in the design, there is no pressure and exhaust fan. The main type of fuel is coal, firewood, peat. To maintain a stable temperature, a heating element is built in.

The solid fuel floor model has a lot of power and can be used not only in everyday life, but also for heating institutions. 

Coal, peat, wood are used for work. The dimensions of the logs should not exceed 32 cm. The boiler designers have provided protection against water overheating, there is an autonomous operation mode.

A simple and reliable German-made boiler has high power and heats rooms up to 320 m2. 

The body is made of special steel intended for heating boilers. The design is thought out so that the operation of the device is efficient:

The boiler operates in 2 modes - burning fuel and smoldering.

The Russian-made model can be called two in one. Fuel loading is horizontal, there is a cooking panel on the upper surface of the boiler. 

A convenient and economical solution to 2 questions at once. You can heat the house and cook food. The fuel for the model is coal and firewood. Process control is simple and does not require much effort.

The large size of the firebox and the door allows you to load 3 buckets of coal or firewood 54 cm long at a time. 

The model provides for horizontal loading. The feed hatch is angled, making the process simple and fast.. Due to the energy obtained from combustion, hot water is circulated. The design uses a flow control system that eliminates the appearance of "dead zones".

The boiler operates in standard and economical mode.

Miniature model designed for heating small spaces. A simple and reliable boiler will be a good choice for a small family. 

Heating is provided through the use of coal, briquettes and firewood. The size of the logs is up to 40 cm. The fuel loading is horizontal, the hatch handle is made of heat-resistant material. The large ash pan door allows you to clean the boiler quickly and easily. The design is thought out so that the burning process lasts up to 18 hours.

The main type of fuel for the model is pellets. Additionally, firewood is used. 

The heat exchanger is located vertically, automatic fuel supply is provided, and the grate moves to clean the chamber. The boiler has a pressure equalization option. To work with wood, an additional grate is installed, which is included in the kit.

A solid fuel boiler cannot operate on anthracite coal and coke. 

The model has an autonomous mode of operation, there is protection against overheating of water. Fuel loading is vertical, which allows you to quickly load raw materials.