Jigsaw for home and professional work | TOP 10 Best: Rating by quality + Reviews

One of the most powerful models with a molded sole and a rubberized bracket-shaped handle that fits comfortably in the hand. In addition, the device comes with a frame for uniform sawing on the plane, the option of quick attachment of the file with a clamp is implemented.

When the tool is in operation, it is easy to adjust the stroke frequency and cut with a pendulum stroke in 4 steps, to produce an angular inclination of 45 degrees. A vacuum cleaner is connected to the device to blow the place of the cut.

The saw cut is even, without chips. The power of 850 W allows you to cut a wooden beam 10 cm thick and a steel sheet 0.6 cm thick. The device weighs only 2.3 kg, it works only from the mains, the protective screen eliminates the risk of accidental injury.

A jigsaw that can cut wood and metal, lay laminate, cut plywood and drywall. Included with the device are a guide and a file. Mushroom handle fits comfortably in the hand.

The cut area is blown by connecting a vacuum cleaner: if the function is not turned on, then the direction of sawing will not be visible due to sawdust. The course is smooth, pendulum in 4 steps, without strong vibrations.

The device works only from the network, but the wire is quite short - only 2 m. The tool weighs 2.9 kg.

Manual electric jigsaw, in the basic configuration of which there is a case, a file and plates to protect against sawdust. Weighs only 2 kg, equipped with a mushroom-shaped handle, comfortable due to the rubberized surface.

Quite productive (710 W of power consumption and 470 W of output) the device saws through sheets of non-ferrous metal 25 mm thick, sliding over the material on a cast sole.

The vibration level is minimal, and the blade stroke can be adjusted, fixed at a constant frequency and used in pendulum mode in 4 steps. The device does not run on batteries, but high mobility is achieved due to the cord length of 4 m.

A feature of the model is the presence of a laser marker to determine the direction of the cut. The kit includes a hex wrench, file, motor brushes and a parallel guide.

The handle is staple-shaped with a rubberized insert for easy grip, protection - in the form of a special shield. As in competing models, Bort BPS-710U-QL has a stamped steel sole, a quick file attachment system.

You can connect a vacuum cleaner to the jigsaw to get rid of sawdust, and a four-stage pendulum stroke for cutting thick materials. The device weighs just over 2 kg.

The ergonomic and productive device weighs only 2.35 kg and fits comfortably in the hand thanks to the rubberized handle. The blade stroke is quiet when cutting, the level of vibration is negligible. The pendulum stroke allows high-quality sawing of raw materials of considerable thickness.

The device has the function of adjusting the inclination of the sole by 45 degrees without a key, the depth of cut in steel is 5 mm, and in aluminum - 15 mm.

Even the little things are thought out in the device: there is a compartment for storing files, and the quick-clamping system simplifies the replacement of working material.

The tool with the highest maximum sawing frequency of 3100 strokes per minute. Cast aluminum base with 45-degree inclination in the device is complemented by a rubberized bracket-shaped handle. The device fits comfortably in the hand and weighs only 1.9 kg.

In the kit, the manufacturer provides a file and a key, as well as a protective shield to eliminate the threat of injury. Sawdust when sawing wood and metal is removed with a vacuum cleaner connected to the nozzle.

The pendulum stroke works in 4 steps, it is possible to adjust the blade speed. Users are advised to install a casing on the ventilation holes for protection, but in general the model is considered one of the best for domestic needs.

It cuts chipboard and plastic well; when cutting metal, it is better to lubricate the working surface.

The model is equipped with a rubber-coated handle and stamped sole. Cleaning the cutting area is provided by a sawdust blowing system, and the possibility of connecting a vacuum cleaner is also thought out.

The jigsaw has the option of tilting the sole by 45 degrees and a protective shield. However, the tool does not have a quick-clamping fastening of the file, which somewhat lengthens the process of setting the tool.

The stationary machine is suitable for home workshops and small industrial production. By means of a rotary handle the frequency of turns depending on type of working material is regulated.

The maximum workpiece thickness for straight or shaped sawing is 57 mm. The length of the file is 127 mm, and the size of the desktop is 41 by 23 cm. The desktop model weighs 14 kg.

The kit includes rubber feet (for fixing the device on the surface), blowing system, protective screen, 2 files, clamp. The tool is used with both pin and pinless files.

The body of the instrument is made of sound-absorbing material, the frame is made of die-cast ribbed aluminum. For this reason, a low-power desktop jigsaw is so quiet that a vacuum cleaner connected to a sawdust blower will make more noise.

The set includes a set of 5 files for wood, metal and plastic. There is a system for adjusting the speed of sawing cycles, a retractable sash to remove sawdust formed during operation.

However, the device operates only from the mains and is not equipped with a quick fixing system for files.

Rubberized mushroom handle, steel sole, backlight and quick-clamp saw blade attachment - the tool is not inferior to its more massive competitors in terms of characteristics.

However, the device runs on a battery with a capacity of 2.5 Ah and weighs only 1 kg, which makes the BOSCH EasySaw 12 0 one of the best models for domestic needs and short cuts. The model is often used both as a jigsaw and as a hacksaw, but it uses standard files with a T-shank.