How to make a mousetrap? with your own hands? | The most effective way to control rodents

75 Views 0

The invasion of small gray rodents is a real problem not only for summer residents, but also for those who live in the private sector. They not only eat your supplies in the barn or cellar, but also strive to get into the house. We will show you how to make a spinning mousetrap with a very simple design.
To do this, we need a metal cylinder that rotates around the central rod. If you can’t get one, then it’s quite possible to use a home-made wooden one. The main thing is that he is very sensitive to touch.

Content:

Content:

Materials for manufacturing
Testing
- - Video: How to make a mousetrap with your own hands
  - How to make a mousetrap with your own hands

Do-it-yourself furniture and other wood products: drawings of benches, tables, swings, birdhouses and other household items (85+ Photos & Videos)

Materials for manufacturing

In order to make a mousetrap with your own hands, you will need:

metal cylinder with a rod;
10 liter plastic bucket;
drill;
saw;
screws;
peanut butter.

Step 1. Drill holes

At the top of a plastic 10-liter bucket, approximately at a distance of 1-2 cm from the edge, we drill two holes strictly opposite each other. The diameter of the hole must be chosen so that the metal rod rotates easily in the hole.

Step 2. Adjust the length of the rod

We adjust the length of the central rod along the upper diameter of the bucket at the level of the drilled holes. It should protrude 0.5-1 cm on each side.

Step 3 Installing the Metal Cylinder

You need to make sure it spins freely. This is the key to successful hunting and the effectiveness of our mousetrap.

Step 4. Making the approach to the cylinder

In order for the mice to get to the rotating cylinder, we put boards directly under the rod from the outside. We cut the upper part of each of the boards at an angle so that the board fits close to the outer wall of the bucket, but does not interfere with the rotation of the rod. For greater stability and fixation, we fasten them to the bucket.

Step 5. Pour water into the bucket

Step 6. Lay out the bait

To bait the mice, put a little peanut butter in the center of the cylinder, and lightly grease the cylinder itself and the middle of each of the boards. To prevent mice from climbing out of a bucket of water, its walls can be smeared with a small amount of unscented liquid soap.

We make vertical beds with our own hands: the best ideas of 2018. For vegetables, berries, herbs and flowers (65+ Photos & Videos) + Reviews

Testing

We set our mousetrap for the night and observe. To feast on peanut butter, mice climb onto a metal cylinder and, having lost their balance, fall into the water.