How to pierce a bottle with a nail? ? | A simple trick and your guests will be delighted

123 Views 1 comment

If you are a frequent guest at parties, then you know that there comes a time when guests start to get bored. This is where the hosts go out of their way to surprise their guests and add fresh impressions. It's your turn to receive guests, and they already know all your tricks? Read this article to the end. You will be pleased to surprise your friends.

Work materials
Step 1. Preparatory work.
Step 2. Drilling the bottle
Video: How to pierce a glass bottle with a nail

How to make a kitten do-it-yourself paper

Materials for work

To pierce a bottle with a nail, you will need:

glass and plastic bottles;
long nail;
drill;
conventional and tubular drill with diamond coating of the desired diameter;
plastic basin;
a piece of thin plywood;
rubber band for money;
compass;
marker.

Step 1. Preparatory work.

Fold the elastic in half and mark with a marker on opposite edges.

We put an elastic band on the bottle and transfer the marks to the glass in the right places.

In a piece of thin plywood with an ordinary drill, slightly larger than the thickness of the nail, we drill a hole.

When drilling holes in glass with a diamond-coated tubular drill, it is necessary to provide it with reliable cooling. For these purposes, we use a regular plastic bottle. At the required height, we punch a hole (you can use a compass for this). Having filled the bottle with water and slightly opened the lid, we get a jet of water sufficient for high-quality cooling of the drill.

Step 2. Drilling the bottle

We place a glass bottle in a plastic basin and cover it with plywood, aligning the hole in the plywood with the mark on the bottle.

We place a plastic bottle in the basin. Opening the lid, direct a jet of water at the drilling site. It will not only cool the drill, but also wash off dust and small fragments.

With a diamond-coated tubular drill, we first drill one and then the second hole.

We drill holes with a diamond-coated tubular drill

Position the drill strictly perpendicular, exerting minimal pressure on the drill.

Insert a nail into the resulting holes.

Source: https://youtu.be/_3uybu86yYc

In order to surprise everyone at the party, it is enough to seal the holes with tape or fill with silicate glue. Your guests will be trying to repeat the trick, so prepare plenty of bottles and a broom to clean up the fragments?.