What can be made from the neck of a plastic bottle?

112 Views 0

In our articles, we wrote a lot about the use of plastic bottle tape. This is both a broom and chain and much more. In the process of dissolving the bottles into ribbons, many necks remain. In today's article we will tell you what can be done from the neck of a plastic bottle. Let's not keep the intrigue for a long time, but let's say right away that this is a container for cuttings of various tools. The longer the neck of the bottle, the more capacious the container will be.

Content:

Materials for manufacturing

Do-it-yourself drip irrigation device in a greenhouse: from a barrel, a plastic bottle, and even an automatic system. For tomatoes and other crops (Photo & Video) + Reviews

Materials for manufacturing

In order to make a container, you will need:

necks of various plastic bottles with caps;
cuttings of various tools;
mounting hair dryer (lighter, boiling water) for heat shrinkage;
knife.

Step 1. Making a seed container on a chopper handle

We select the neck of the bottle according to the size of the chopper handle.

We put the neck on the edge of the handle and, turning the handle along with the neck, heat shrink with a hot air gun.

we make heat shrinkage with a mounting hair dryer

In the absence of a hair dryer, shrinkage of polyethylene can be done by watering it in the right place with boiling water or heating it with a lighter.

Cut off the excess part of the neck with a knife. The container is firmly held on the handle and does not rotate.

Now it is convenient to place seeds in such a container, be sure to tighten the lid. They will not roll up anywhere and will not fall out, as from an ordinary pocket, and will be at hand all the time.

Step 2. Making a container on a large round handle

For large cuttings, you will need necks with a piece of the bottle left.

We put it on the handle of a shovel, pitchfork, rake or any other tool.

We heat shrink with a lighter. Cut off the excess with a knife.

In such a container, you can put nuts, screws, bolts. They definitely won't fall out or get lost.

Step 3. Making a container on an ax handle

It would seem impossible to attach the neck of a round bottle to a rectangular ax handle. But no, it's still in our power. You just need to cut off the neck with an even larger part of the bottle.

We repeat the same actions as in the previous steps: dress, seat. In this case, you don’t even have to cut anything superfluous, the container sat on the handle like a glove.